Mini GPS Tracker Murah
Track online with auto tracking, register at at: http://gps-trace.com/
Once sim card is inserted with an active sim card (make sure sim card has caller ID on).
SMS Commands-
1. Enable TK102
To enable your tk102 gps tracker, send the command
Example – “
2. Password reset
The password is important, because every command you sent to the tracker need to follow with the password.
The default password is “
Example – “
Note: password must be 6 digits long.
For the sake of this tutorial we will change the password back to default.
3. Authorization
You can authorize 5 different number on the allow list, so they can command the tracker.
There is two way to authorize, one is calling, number, then this number will automatically became one authorized number.
The most convenient way, send a message in the format of “admin+password cell phone number” to the tracker.
Example: Send “
To remove a number from the allow list then send sms in the format of ”
Example: Send “
list.
If you’re authorising your tracker to call it from outside your own region (or country) then make sure to place the area code or country in front of the number.
Example: If your tracker is in the United States, and you’re calling the tracker from United Kingdom, then you’ll need to authorize your number as “
Australia – 61
UK – 44
USA – 1
Find full list of country codes here.
4. Auto Tracking
This GPS have the auto tracking function. The command syntax as follow:
“
This syntax seems a little bit confusing, so let me give few example for you.
*Note: In time unit, “
Examples:
Send auto report every 30 seconds, and repeat five times, the command is:
“
In this example, where 030 is the interval of 30 seconds, the 005 means repeat 5 time, 123456 is the password.
Time interval and repeat time must be in 3 digits length.
If you want to set the auto tracking to report every 1 hours and repeat 24 times. Then send SMS as “
To cancel auto tracking, send “
5. Voice Surveillance
You can set the tracker into monitor mode, when you call the tracker, the tracker will answer your phone and transfer the voice around the tracker back to you.
To set the tracker into voice surveillance mode (monitor mode), send command:
“
6. Geo-fence
Geo-fence will help you to restrict the target within a certain preset area. When the target breach the restrict area, you’ll get a message report.
Note: You need to let the tracker stay still for 10 minutes before you send the command to it.
The command is “
If you are unsure of the GPS coordinates of the zone your are creating a Geo-Fence for, the simplest way is to use Google Maps.
Go to http://maps.google.com, and find the location of the desired Geo-fence you would like to create. In this example we will use the city of Adelaide, South Australia.
Place your cursor over the map and “right click” where you would like the top left corner of the Geo-fence to be… and then select “What’s here?” option.
This will reveal the exact latitude and longitude coordinates of the cursor position on the map.
The following picture will show you how it works, the restricted area is defined by the two coordinate you set.
Copy the latitude and longitude coordinates as they appear into the first half of your Geo-fence command.
“
Now place the cursor on the bottom right position of the Geo-fence, “right click”, select “What’s here?” and copy the coordinates into the last half of your command.
“
With this coordinates set in the Geo-fence command, a rectangle will be created as the boundry of the Geo-frence.
no further North than -34.922112, South than -34.934919, East than 138.612270 and West than 138.587036
To cancel the Geo-fence, send command “
7. Movement alert
When movement alert is enable, once a movement of the target is detected ( a movement of 200 meter by default), the tracker will send a report to you, and the movement aleart will be disable automatically.
To set a movement alert, send command “
8. Overspeed alert
This is a very useful function to monitor if the target is overspeed.
To set the overspeed alert, send command “speed+password speed”.
Example: If you need to set the speed limit to 80km/s then send command
“speed123456 080″, the speed must be in 3 digits length, and the speed unit is km/s.
Note: This is a one time alert, the alert will be deactivate once a speed breach is detected.
To cancel the alert, send command “nospeed+password”
9. IMEI number
IMEI stand for “International Mobile Equipment Identity”, it’s a unique number given to the GPS tracker, you can acquire this number by sending the command
10. SOS
You may already notice there is a SOS button at this tracker.
Press the SOS for 3 seconds, it’ll send a SOS message with coordinate to all authorized number every 3 mintues, until a SMS “help me!” is replied to the tracker.
11. Low battery alert
This is an automatically function, the GPS tracker will constantly send you a low battery alert every 30 minutes once the voltage dropped to 3.4v.
12. Changing the system time zone
Command
Note: time zone is define by UTC time. Adelaide time zone is +9:30.
Example: “
13. Enable SMS link mode
To change the default SMS text coordinates to a link that opens the GPS coordinates on Google Map, send the following command
“
To change the sms map link back to the default text coordinates, send the command “
In configuration software or file of the TK-102 tracker use the following settings to connect it to free GPS tracking system:
Configure TK102 for GPRS
In order GPS-Trace.com free GPS tracking service to correctly identify incoming data from Xexun TK-102 tracker in the settings use following parameters:
Unique ID:
IMEI (15 digits)
Phone number: #########
Phone number of device’s SIM card in the international format, starting from ‘+’
In order to configure the object, you have to follow these steps by sending SMS commands to the tracker:
replace for IP of monitoring system
SMS Command List Summary
Password modification
“
“
- the password should be 6 digitals
Authorization
“
“
- there are 4 other numbers can set as the masters,use the same way to set them.
IP and Port Setting
“
“
- When you need the tracker has the way of GPRS transferring,this is the necessary setting.
APN setting
“
“
- When you need the tracker has the way of GPRS transferring,this is the necessary setting.And APN refers to the GSM card’s APN.
APN user name setting
“
“
- If the APN has user name,this is the command to setting this.
APN password setting
“
- If the APN has password,this is the command to setting this.
Interval tracking
“
“
- T=time,s=second,m=minutes,h=hour,n=times,t030s005n123456 means track 5 times for 30s interval,
“***” means countless times.And the minimum interval time is 5 seconds(new vesion tracker),30 seconds(old vesion),the maximum times is 250 times.
Tracking mode
“
“
- If you need switch the other modes to tracking mode,you need send this commands.
Track once
tracking one / or call the tracker once
tracking one
- If you want to have the tracker only report once,send tracking one to the tracker,or call the tracker once.
Listen in mode
“monitor+password”
“
- If you need switch the other modes to listen in,you need send this commands. When you use the tracker first time,call the tracker,tracker reports you the
coordinates,send “
Geofence
“
“
“
- Send this sms command to the tracker,then if the tracker run out the area you have set,it will send “stockade”with the location to you.
Movement Alert
move+password”
“
- The tracker will move 500m at least,or you cannot get this alert.”move with the location”
Overspeed Alert
“
“
- The unit of the speed is km which is the orignal data from the GPS,and if the speed less then 30km/h,you won’t get the alert “speed+location”
Low battery Alert
no needing to set up
No needing to set up
- When the back up battery is less than 3.7V,it will send ” L”.
Initialization
“
“
P.S”To cancel all the settings,you need this commands,but if you forget the password,you need update the firmware.
IMEI Checking
“
“
- If you want to know the IMEI number of the tracker,you need this command.
SOS
no needing to set up
No need to set up
- When someone press the SOS,you will get the information of ‘help me with the coordinates”.
Ignition alert
“
“
- Only for the vehicle tracker,there are two wires connect the ACC(ignition),if you send “fortify123456″,then anyone switch on the vehicle,it will send alert.
Ignition Status checking
“
“
- If you want to make sure that the tracker in under this function,send this commands,and tracker will reply you.
Main power losing alert
no needing to set up
No need to set up
- If the main power is losing,the tracker will send “battery”.
Time zone setting
“
“
- “UK time is time zone123456 1″currently.
Individual Website setting
“
“
- If “tracker” wants make the returned sms has their domain name,they can set “home123456 www.tracker.com”.
Relay on/off (stop engine)
“
“
- Only the vehicle tracker has this function,”powercar123456 1/0″ 1=on,0=off
Shake Alert(with the motion)
“
“
sensor)
- Only the new version tracker has this function,from 0-10,means from shake heavily to softly,1 means the heaviest,10 means the softest.0=off
Read SD card
“
“
- Only the new version tracker has this function,where there is not GPRS connection,tracker records the information into the SD card and when there comes
the GPRS connection,tracker sends all the information to the server.1=on,0=off.
SMS report
“
“
Send report in SMS (it’s working during the gprs communication too…)
Restart tracker
“
“
- This command is restart the tracker.
1. Enable TK102
To enable your tk102 gps tracker, send the command
"begin+password"Example – “
begin123456”
2. Password reset
The password is important, because every command you sent to the tracker need to follow with the password.
The default password is “
123456“, and you may want to change it once you ready to use, to change the password send a message include “password+old password new password“ to the tracker.Example – “
password123456 567890“ will change your password from “123456” into “567890“.Note: password must be 6 digits long.
For the sake of this tutorial we will change the password back to default.
3. Authorization
You can authorize 5 different number on the allow list, so they can command the tracker.
There is two way to authorize, one is calling, number, then this number will automatically became one authorized number.
The most convenient way, send a message in the format of “admin+password cell phone number” to the tracker.
Example: Send “
admin123456 0432733918” will authorize phone number 0432733918 on the allow list.To remove a number from the allow list then send sms in the format of ”
noadmin+password cell phone number“.Example: Send “
noadmin123456 0432733918” will exclude the number 0432733918 from the allowlist.
If you’re authorising your tracker to call it from outside your own region (or country) then make sure to place the area code or country in front of the number.
Example: If your tracker is in the United States, and you’re calling the tracker from United Kingdom, then you’ll need to authorize your number as “
61432733918” as the “61” is the country code of United Kingdom.Australia – 61
UK – 44
USA – 1
Find full list of country codes here.
4. Auto Tracking
This GPS have the auto tracking function. The command syntax as follow:
“
t+time interval+time unit+repeat time+n+password”This syntax seems a little bit confusing, so let me give few example for you.
*Note: In time unit, “
s” stand for second, “m” stand for minute and “h” stand for Hours.Examples:
Send auto report every 30 seconds, and repeat five times, the command is:
“
t030s005n123456”
In this example, where 030 is the interval of 30 seconds, the 005 means repeat 5 time, 123456 is the password.
Time interval and repeat time must be in 3 digits length.
If you want to set the auto tracking to report every 1 hours and repeat 24 times. Then send SMS as “
t001h024n123456“.To cancel auto tracking, send “
notn+password“.5. Voice Surveillance
You can set the tracker into monitor mode, when you call the tracker, the tracker will answer your phone and transfer the voice around the tracker back to you.
To set the tracker into voice surveillance mode (monitor mode), send command:
“
monitor+password“,
make sure to set it back to tracker mode once you want it to report
geographic info, to set it back to tracker mode send command “tracker+password“.
6. Geo-fence
Geo-fence will help you to restrict the target within a certain preset area. When the target breach the restrict area, you’ll get a message report.
Note: You need to let the tracker stay still for 10 minutes before you send the command to it.
The command is “
stockade+password latitude1, longitude1;latitude2, longitude2“If you are unsure of the GPS coordinates of the zone your are creating a Geo-Fence for, the simplest way is to use Google Maps.
Go to http://maps.google.com, and find the location of the desired Geo-fence you would like to create. In this example we will use the city of Adelaide, South Australia.
Place your cursor over the map and “right click” where you would like the top left corner of the Geo-fence to be… and then select “What’s here?” option.
This will reveal the exact latitude and longitude coordinates of the cursor position on the map.
The following picture will show you how it works, the restricted area is defined by the two coordinate you set.
Copy the latitude and longitude coordinates as they appear into the first half of your Geo-fence command.
“
stockade123456 -34.922112, 138.587036;latitude2, longitude2“Now place the cursor on the bottom right position of the Geo-fence, “right click”, select “What’s here?” and copy the coordinates into the last half of your command.
“
stockade123456 -34.922112, 138.587036;-34.934919 138.612270”With this coordinates set in the Geo-fence command, a rectangle will be created as the boundry of the Geo-frence.
no further North than -34.922112, South than -34.934919, East than 138.612270 and West than 138.587036
To cancel the Geo-fence, send command “
nostockade+password“.7. Movement alert
When movement alert is enable, once a movement of the target is detected ( a movement of 200 meter by default), the tracker will send a report to you, and the movement aleart will be disable automatically.
To set a movement alert, send command “
move+password“, to deactivate the alert, send command “nomove+password“.
8. Overspeed alert
This is a very useful function to monitor if the target is overspeed.
To set the overspeed alert, send command “speed+password speed”.
Example: If you need to set the speed limit to 80km/s then send command
“speed123456 080″, the speed must be in 3 digits length, and the speed unit is km/s.
Note: This is a one time alert, the alert will be deactivate once a speed breach is detected.
To cancel the alert, send command “nospeed+password”
9. IMEI number
IMEI stand for “International Mobile Equipment Identity”, it’s a unique number given to the GPS tracker, you can acquire this number by sending the command
"imei+password".
10. SOS
You may already notice there is a SOS button at this tracker.
Press the SOS for 3 seconds, it’ll send a SOS message with coordinate to all authorized number every 3 mintues, until a SMS “help me!” is replied to the tracker.
11. Low battery alert
This is an automatically function, the GPS tracker will constantly send you a low battery alert every 30 minutes once the voltage dropped to 3.4v.
12. Changing the system time zone
Command
"time zone+password time zone"Note: time zone is define by UTC time. Adelaide time zone is +9:30.
Example: “
time zone123456 +9:30” to change the system into Adelaide time.
13. Enable SMS link mode
To change the default SMS text coordinates to a link that opens the GPS coordinates on Google Map, send the following command
“
smslink+password"
To change the sms map link back to the default text coordinates, send the command “
smstext+password"
In configuration software or file of the TK-102 tracker use the following settings to connect it to free GPS tracking system:
Configure TK102 for GPRS
In order GPS-Trace.com free GPS tracking service to correctly identify incoming data from Xexun TK-102 tracker in the settings use following parameters:
Unique ID:
IMEI (15 digits)
Phone number: #########
Phone number of device’s SIM card in the international format, starting from ‘+’
In order to configure the object, you have to follow these steps by sending SMS commands to the tracker:
"apn123456 mts" – sets the required apn for gprs configuration"apnuser123456 mts" – sets the user for gprs configuration"apnpasswd123456 mts" – sets the password for gprs configuration. For new equipment versions user and password are set with one command "admin123456 mts mts""GPRS123456" – we’re setting GPRS mode"adminip123456 20157" – sets the server’s address for packages sending, "t030s***n123456" – sets the interval of messages sending to 30 seconds. For new equipment versions this command can have the following format "fix030s***n123456"SMS Command List Summary
Password modification
“
password+old password+space+new password”“
password123456 666888”- the password should be 6 digitals
Authorization
“
admin+password+space+cellphone number”“
admin123456 13311112222”- there are 4 other numbers can set as the masters,use the same way to set them.
IP and Port Setting
“
adminip+password+space+IP address+space+port”“
adminip123456 192.167.1.1 8899”- When you need the tracker has the way of GPRS transferring,this is the necessary setting.
APN setting
“
APN+password+space+the user's APN”“
APN123456 internet”- When you need the tracker has the way of GPRS transferring,this is the necessary setting.And APN refers to the GSM card’s APN.
APN user name setting
“
apnuser+password+space+apn's username”“
apnuser123456 come”- If the APN has user name,this is the command to setting this.
APN password setting
“
Apnpasswd+password+space+apn's password”apnpasswd123456 cmet”- If the APN has password,this is the command to setting this.
Interval tracking
“
t030s005n+password“
t030s005n123456- T=time,s=second,m=minutes,h=hour,n=times,t030s005n123456 means track 5 times for 30s interval,
“***” means countless times.And the minimum interval time is 5 seconds(new vesion tracker),30 seconds(old vesion),the maximum times is 250 times.
Tracking mode
“
tracker+password”“
tracker123456- If you need switch the other modes to tracking mode,you need send this commands.
Track once
tracking one / or call the tracker once
tracking one
- If you want to have the tracker only report once,send tracking one to the tracker,or call the tracker once.
Listen in mode
“monitor+password”
“
monitor123456”- If you need switch the other modes to listen in,you need send this commands. When you use the tracker first time,call the tracker,tracker reports you the
coordinates,send “
monitor123456"“,call the tracker you will hear what happen around the tracker.Geofence
“
stockade+password+space+longitude”“
stockade123456 latitude;longitude,latitude“
22.567185,114.051248;22.555666,114.777888”- Send this sms command to the tracker,then if the tracker run out the area you have set,it will send “stockade”with the location to you.
Movement Alert
move+password”
“
move123456”- The tracker will move 500m at least,or you cannot get this alert.”move with the location”
Overspeed Alert
“
speed+password+space+080”“
speed123456 080”- The unit of the speed is km which is the orignal data from the GPS,and if the speed less then 30km/h,you won’t get the alert “speed+location”
Low battery Alert
no needing to set up
No needing to set up
- When the back up battery is less than 3.7V,it will send ” L”.
Initialization
“
begin+password”“
begin123456”P.S”To cancel all the settings,you need this commands,but if you forget the password,you need update the firmware.
IMEI Checking
“
imei+password”“
imei123456”- If you want to know the IMEI number of the tracker,you need this command.
SOS
no needing to set up
No need to set up
- When someone press the SOS,you will get the information of ‘help me with the coordinates”.
Ignition alert
“
fortify+password”“
fortify123456”- Only for the vehicle tracker,there are two wires connect the ACC(ignition),if you send “fortify123456″,then anyone switch on the vehicle,it will send alert.
Ignition Status checking
“
fortified+password”“
fortified123456”- If you want to make sure that the tracker in under this function,send this commands,and tracker will reply you.
Main power losing alert
no needing to set up
No need to set up
- If the main power is losing,the tracker will send “battery”.
Time zone setting
“
Time zone+password+space+GMT time”“
Time zone123456 2”- “UK time is time zone123456 1″currently.
Individual Website setting
“
Home+pasword+space+the user's webite”“
home123456 www.tracker.com”- If “tracker” wants make the returned sms has their domain name,they can set “home123456 www.tracker.com”.
Relay on/off (stop engine)
“
Powercar+password+space+1 (or 0)”“
Powercar123456 1”- Only the vehicle tracker has this function,”powercar123456 1/0″ 1=on,0=off
Shake Alert(with the motion)
“
shake+password+space 1-10”“
shake1234656 1”sensor)
- Only the new version tracker has this function,from 0-10,means from shake heavily to softly,1 means the heaviest,10 means the softest.0=off
Read SD card
“
Readsd+password+space+1“
readsd123456 1”- Only the new version tracker has this function,where there is not GPRS connection,tracker records the information into the SD card and when there comes
the GPRS connection,tracker sends all the information to the server.1=on,0=off.
SMS report
“
smslinkone+password”“
smslinkone123456”Send report in SMS (it’s working during the gprs communication too…)
Restart tracker
“
restart+password”“
restart123456”- This command is restart the tracker.
Saturday, July 13, 2013
Setting web Mode GPS di GPSdog.net
| SETTINGS FOR SYSTEM AND GPS TRACKER | |
|
System does not set your GPS tracker automatically for GPRS. You set GPS tracker manually according to instructions in the user manual.
If tracker not work with "GPS tracker settings" You can use commands (for TK102b, TK103 and other TK devices):
apn123456 yourAPN : misal apn123456 telkomsel
adminip123456 46.28.110.207 9991
gprs123456
adminip123456 46.28.110.207 9991
gprs123456
t060s***n123456
Warning !!!
Please use the SIM card which is with GPRS function.
It is neccessary to turn off a PIN security on the SIM card which is intended for the device usage. You can do it either by inserting the SIM card into your phone and following the choices offered by your mobil operation menu, or you can contact your mobile operator. If you do not turn PIN security off , consequently, your device shall not work after restart. It is logical, as SIM card, after restarting requires PIN and it means that the device is unable to transmit GPRS data and alarming SMS.
It is neccessary to turn off a PIN security on the SIM card which is intended for the device usage. You can do it either by inserting the SIM card into your phone and following the choices offered by your mobil operation menu, or you can contact your mobile operator. If you do not turn PIN security off , consequently, your device shall not work after restart. It is logical, as SIM card, after restarting requires PIN and it means that the device is unable to transmit GPRS data and alarming SMS.
Setting GPS tracker di gps-trace.com
Xexun TK-102
Personal GPS tracker Xexun TK-102. Manufactor - Xexun
Supported capabilities:
Communication via TCP
Digital sensors
ADC sensors
Remote management through SMS channel
Reading incoming SMS messages
Remote management through GPRS channel
In configuration software or file of Xexun TK-102 tracker use following settings to connect it to free GPS tracking system GPS-Trace Orange:
In order to configure the object, you have to follow these steps by sending SMS commands to the tracker:
Personal GPS tracker Xexun TK-102. Manufactor - Xexun
Supported capabilities:
Communication via TCP
Digital sensors
ADC sensors
Remote management through SMS channel
Reading incoming SMS messages
Remote management through GPRS channel
In configuration software or file of Xexun TK-102 tracker use following settings to connect it to free GPS tracking system GPS-Trace Orange:
| Server IP: | 193.193.165.166 |
|---|---|
| Server port: | 20157 |
| Server phone number: | +447624804309 |
In order GPS-Trace Orange free
GPS tracking service to correctly identify incoming data from Xexun
TK-102 tracker in the settings use following parameters:
| Unique ID: | IMEI (15 digits) |
|---|---|
| Phone number: | Phone number of device's SIM card in the international format, starting from '+' |
In order to configure the object, you have to follow these steps by sending SMS commands to the tracker:
- "begin123456" - resets all controller's settings, password 123456 is set by default
- make a call to the controller, which should wait untill two beeps, break the call and send SMS with it's coordinates
- "apn123456 telkomsel" - sets the required apn for gprs configuration
- "apnuser123456 wap" - sets the user for gprs configuration
- "apnpasswd123456 wap123" - sets the password for gprs configuration. For new equipment versions user and password are set with one command "admin123456 mts mts"
- "GPRS123456" - we're setting GPRS mode
- "adminip123456
20157" - sets the server's address for packages sending, replace for IP of monitoring system contoh adminip123456 193.193.165.166 20157 - "t030s***n123456" - sets the interval of messages sending to 30 seconds.
- Untuk membalikan ke sms Mode ketik noadminip123456
Sunday, June 23, 2013
TK-102 GPS Tracker
Xexun TK-102 GPS Tracker
Xexun TK-102 GPS Tracker
Salah
satu pelacak yang paling populer adalah Xexun 102 dan 103 pelacak. Ada
perangkat imitasi yang dijual jadi hati-hati. Aku belum pernah melihat
produk di mana dokumentasi sangat buruk, jumlah versi dokumentasi sangat
besar (masing-masing mengatakan sesuatu yang berbeda) dan di mana ada
tidak 1 tempat di internet yang memberitahu Anda cara kerjanya. Ada
forum dengan banyak informasi: 1 BENANG dengan 2.500 pesan!??
Saya masih akan membeli TK-102 atau TK-103 jika aku butuh satu lagi ;-)
Xexun TK 102 Ini adalah 'saku' tracker. Sangat kecil, dengan baterai, built in antena.
Xexun
TK 103 Lebih untuk tetap mount di dalam mobil. Memiliki banyak tambahan
seperti mikrofon eksternal, antena eksternal untuk GPS dan Cell,
kemampuan untuk menutup switch jarak jauh dll
Cara setup
Jadi,
inilah gambaran tentang bagaimana saya dikonfigurasi saya TK-103.
Instruksi ini akan kemungkinan besar juga bekerja untuk Xexun TK-102.
Layanan gratis pelacakan yang digunakan: Orange GPS Trace. Pertama
mendaftarkan diri.
Sekarang
Anda harus men-setup perangkat Pelacakan Anda dengan mengirimkan pesan
SMS (teks) untuk itu. Pastikan memiliki kartu SIM yang sah yang
mendukung DATA.
begin123456 (membersihkan konfigurasi tracker)
> BEGIN ok
password123456XXXXXX (jika Anda ingin mengubah 123456 ke sesuatu yang lain)
> PASSWORD ok
adminXXXXXX0611223344 (nomor ponsel Anda - sehingga ia tahu bahwa perintah dikirim oleh telepon Anda adalah valid)
> ADMIN ok
apnXXXXXXbasicinternet (APN dari operator Anda)
> APN ok
adminipXXXXXX193.193.165.166 20157 (IP dan nomor PORT layanan pelacakan GPS-TRACE)
> ADMINIP ok
t030s *** nXXXXXX (t030 = setiap 30 detik, s *** n = pesan tak terbatas, ganti *** dengan jumlah pesan yang dapat mengirimkan)
> T030S *** N ok
webXXXXXX (memungkinkan pengiriman lokasi melalui IP)
> NOTN ok!
nobatteryXXXXXX (opsional: untuk menonaktifkan pesan baterai rendah - percayalah, Anda ingin ini!)
> Ada tanggapan
tlimitXXXXXX 200 (hanya melaporkan lokasi saat dipindahkan> 200 meter)
> TLIMIT ok!
Selanjutnya, login ke layanan Oranye GPS Trace dan menambahkan tracker Anda sebagai perangkat. Lihat gambar di bawah:
Untuk menemukan IMEI perangkat dari jarak jauh Anda dapat menggunakan website ini: http://id.wialon.net/
Ini mengharuskan Anda untuk mengubah adminip tapi itu mudah untuk mengubahnya kembali ke pengaturan di atas.
Ketika semuanya bekerja Anda dapat melihat lokasi Anda di Google Map menggunakan URL berikut
http://orange.gps-trace.com/locator/index.html?u=your_user_id&zoom=13
Simpan
perangkat Anda dan mulai bergerak. Anda harus melihat perangkat Anda
muncul pada Peta di beberapa titik. Gps-trace juga memiliki sebuah
forum. Sekarang Anda dapat mulai menggunakan skrip HomeSeer saya yang
menggunakan Orange Gps Jejak layanan untuk menempatkan lokasi Anda
HomeSeer.
Nikmati!
Friday, June 21, 2013
How To use Mini GPS TK-102
TK-102 is a mini GPS Tracker that constantly report its geographical coordinates via SMS or GPRS network to your nominated device.
This tutorial will cover the following contents:
Application
Interface
Preparation
Quick Setup
Advance settings
Application
*Important notice: Electromagnetic shielding mechanism is one of the major factor that influence GPS signal, things like metal and concrete can easily result in block or weaken signals. Thus this GPS tracker might not function properly indoor, places such as car cargo, large office building,subway station and etc.
TK-102 GPS Tracker is widely used in following instance
1. Mobile Car auto – Tracking (Anti-theft,Logistic tracking and etc.)
2. Person Tracking (Camping,Hiking and etc.)
3. Any other possible purpose you name it
Interface
1.Power: Turn on/off the GPS Tracker
2.SOS Button: Send emergency SMS to preset number
3.Indicator LED
4.Power/Data Jack: To charge the GPS Tracker or communicate with computer
A standard SIM Slot to fit your SIM card in
Preparation
Before using this GPS Tracker you’ll need:
1. A valid SIM Card
Send a test SMS to a mobile phone before you put it into the tracker, make sure you mark down the number, you’ll need it after installation
2. Google Earth (Optional)
Google Earth is a good software that helps you to locate the tracker.
You can find a copy enclose in the disc come with the tracker,we still recommend to get the latest version from Google , click here to download.
However,if you just want to know where the tracker is,you can visit http://maps.google.com instead.
3. Fully charge the battery
Quick Setup
1. Installation
Put your SIM card into the SIM card tray,install the battery,close the back cover. Place it to your desired target(Again,make sure the GPS signal will not be block by any metal or concrete) and turn it on by holding the on/off button for 3sec.
2. Initialization
Each GPS Tracker need to be initialized before use,especially if you purchase it from oversea .
To Initialize you need to send “begin123456″ as a text message to the tracker (Remeber the number we mark down?),you’ll then received a response message from the GPS Tracker as “begin OK”,this mean you have succesfully initialized the GPS Tracker. (In some cases you might expereience a longer response time to receive the message due to weak signal).
3. Begin to use
If you only want the coordinate of the tracker,just make a call to it,the GPS tracker will automatically hangup and send you a message reporting it’s coordinate.
Note: The tracker must set to its ”Tracking mode” (It’s the default setting) to report it’s geographic coordiante. Send a message command “tracker123456″ will set the mode into “Tracking mode”.
The geographic report will containt its longitude and latitude coordinate as follow:
The first number is the longitude and second number is the latitude.
Let’s see an example, if you have coordinate 40.705563,-74.008884 from the GPS Tracker.
Then you simple put it into http://maps.google.com or google earth, you’ll find out the tracker is at somewhere near the wall street,new york.
Advanced Settings
The Quick setup will show you the basic function of the GPS tracker,and this will cover most important function.
*Important note: Some user not sure about the “+” simble in the user manual,so let’s clarify this here, for example the command is “begin+123456″ it stand for ”begin123456″ there is no space or “+” in between.
1.Password reset
The password is important,because every command you sent to the tracker need to follow with the password. The default password is “123456″ , and you may want to change it once you ready to use, to change the password send a message include “password+old password new password” to the tracker. For example “password123456 567890″ will change your password from “123456″ into “567890″. Note:password must be 6 digits long.
2.Authorization
You can authorize 5 different number on the allow list,so they can command the tracker.
There is two way to authorize,one is calling the tracker for 10 times with the same number,then this number will automatically became one authorized number.
The most convenient way,send a message in the format of “admin+password cell phone number” to the tracker.
Example: Send “admin123456 1234567″ will authorize 1234567 on the allow list.
To remove a number from the allow list then send sms in the format of ”noadmin+password cell phone number”.
Example: Send “noadmin123456 1234567″ will exclude the number 1234567 from the allow list.
If you’re calling the tracker outside your own region(or country) then make sure to place the area code or country in front of the number.
Example: If your tracker is in the United States,and you’re calling the tracker from United Kingdom,then you’ll need to authorize your number as “00441234567″ as the “0044″ is the country code of United Kingdom.
3. Auto Tracking
This GPS have the auto tracking function. The command syntax as follow:
“t+time interval+time unit+repeat time+n+password”
This syntax seems a little bit confusing,so let me give few example for you.
*Note: In time unit,”s” stand for second,”m” stand for minute and “h” stand for Hours.
Examples:
Send auto report every 30 seconds,and repeat five times,the command is:
“t030s005n123456″
In this example,where 030 is the interval of 30 seconds,the 005 means repeat 5 time,123456 is the password. Time interval and repeat time must be in 3 digits length.
If you want to set the auto tracking to report every 1 hours and repeat 24 times. Then send SMS as “t001h024n123456″.
To cancel auto tracking,send “notn+password”.
4.Voice Surveillance
You can set the tracker into monitor mode,when you call the tracker,the tracker will answer your phone and transfer the voice around the tracker back to you.
To set the tracker into voice surveillance mode (monitor mode),send command:
“monitor+password” , make sure to set it back to tracker mode once you want it to report geographic info, to set it back to tracker mode send command “tracker+password”.
5.Geo-fence
Geo-fence will help you to restrict the target within a certain preset area. When the target breach the restrict area,you’ll get a message report.
Note: You need to let the tracker stay still for 10 minutes before you send the command to it.
The command is “stockade+password latitude1,longitude1;latitude2,longitude2″
The following picture will show you how it works,the restricted area is defined by the two coordinate you set.
To cancel the Geo-fence,send command “nostockade+password”.
6. Movement alert
When movement alert is enable,once a movement of the target is detected ( a movement of 200 meter by default),the tracker will send a report to you,and the movement aleart will be disable automatically.
To set a movement alert,send command “move+password” , to deactivate the alert,send command “nomove+password”.
7. Overspeed alert
This is a very useful function to monitor if the target is overspeed.
To set the overspeed alert,send command “speed+password speed”.
Example: If you need to set the speed limit to 80km/s then send command
“speed123456 080″, the speed must be in 3 digits length,and the speed unit is km/s.
Note: This is a one time alert,the alert will be deactivate once a speed breach is detected.
To cancel the alert,send command “nospeed+password”
8. IMEI number
IMEI stand for “International Mobile Equipment Identity”,it’s a unique number given to the GPS tracker,you can acquire this number by sending the command “imei+password”.
9. SOS
You may already notice there is a SOS button at this tracker. Press the SOS for 3 seconds,it’ll send a SOS message with coordinate to all authorized number every 3 mintues,until a SMS “help me!” is replied to the tracker.
10. Low battery alert
This is an automatically function,the GPS tracker will constantly send you a low battery alert every 30 minutes once the voltage dropped to 3.4v.
11. Changing the system time zone
Command “time zone+password time zone”
Note: time zone is define by UTC time. Click here to find your time zone UTC.
Smaple: Send command “time zone123456 -5″ to change the system into New york time.
12. GPRS settings (Online Tracking)
Tracking using GPRS required advance programming , so it’s not covered here.
Where to buy?
Call Eko : 0857-10272100
GPS Tracker 102 Official Command
this are the official commands a receive from xexun after a contact.
please note that this command are only for xexun device not clones
Function Command Format Reply
Initialization begin+password begin ok
Change password password+OldPassword+space+NewPassword password ok
Setup authorized phone number admin+password+space+PhoneNumber admin ok
Delete authorized phone number noadmin+password+space+PhoneNumber to be deleted noadmin ok
Get the GPS location (Real-time polling) Dial up the Tracker one time GPS coordinate and info
Auto track
Auto track - 5 times with 30 seconds interval t030s005n+password
Auto track - 26 times with 5 minutes interval t005m026n+password
Auto track - 10 times with 1 hours interval t001h010n+password
Auto track - heaps of times with 30 seconds interval t030s***n+password
Cancel Auto Track notn+password notn ok
Switch to Voice Monitor mode monitor+password monitor ok
Switch to Tracker mode tracker+password tracker ok
Geo Fencing stockade+password+space+longitudeE/W,latitudeN/S; longitudeE/W,latitudeN/S stockade ok
Cancel Geo Fencing nostockade+password nostockage ok
Movement alert move+password move ok
Cancel Movement alert nomove+password nomove ok
Overspeed alert speed+password+space+080 speed ok
Cancel Overspeed alert nospeed+password nospeed ok
IMEI checking imei+password
SMS Center adminsms+password+space+cell phone number
Cancel SMS Center noadminsms+password
Low battery alert low battery+Geo-info
SOS button Press the SOS for 3 seconds help me !+ Geo-info
Time zone setting time+space+zone+password+space+TimeZone
home page setting home+password+space+the website you want to set
Switch to the link format smslink+password
switch back to the text format smstext+password
GPRS Function
Setup APN apn+password+space+the customer’s APN CONTENT
Setup APN username apnuser+123456+space+The APN'S USER NAME
Setup APN password apnpasswd+123456 +space+THE APN'S PASSWORD
Setup IP address & Port adminip+password+space+ip address+space+port
Cancel IP address & Port noadminip+password
Set GPRS MODE-UDP gprsmode+password+1
Set GPRS MODE-TCP(default) gprsmode+password+0
GPS Tracker Personal
Cocok untuk memantau anak2, atau pasangan yang dicurigai, binatang peliharaan (kucing,anjing,dll)
Tidak memerlukan server khusus, karena bisa melihat lokasi via sms dari smartphone.
Spek dan fitur detail :
1) Mengirim laporan secara otomatis
2) Menyimpan Posisi
3) Register/Unregister no telp yang akan di pakai untuk melacak alat
4) Merubah fungsi alat type lacak posisi jadi sadap suara
5) Support tanpa server gps
6) Speed alert: bisa mengirim alarm jika overspeed (kalau di pasang di mobil)
7) Movement alert: bisa mengirim alarm/pemberitahuan jika alat berpindah
8) Power alert: Jika alat di matikan secara normal (matikan dari sakeral) alat akan mengirim alarm
SPECIFICATION:
Dimensions: 64mm x 46mm x 17mm
Band: 850/ 900/ 1800/ 1900Mhz or 900/ 1800/ 1900Mhz only support gsm.
Network: GSM/ GPRS;
GPS Chip: SIRF3 Chip;
GPS Sensitivity: -159dBm;
GPS accuracy: 5m;
Weight: 50g;
Time to First Fix: Cold status 45s Warm status 35s Hot status 1s;
Car Charge: 12-24V input 5V output;
Wall Charger: 110-220V input 5V output;
Battery: Chargeable Changeable 3.7V 800mAh Li-ion battery;
Standby Time: 96 hours;
Bagaimana menggunakan alat ini:
Sederhana, cukup masukkan GSM sim card ke dalam unit gps. ketika anda menelpon ke gps maka gps akan merepon dengan mengirim koordinat lokasi melalui pesan SMS. Anda bs menggunakan google map untuk membaca koordinat tersebut dalam bentuk peta yang akan menunjukkan dimana tepatnya gps berada.
harga 799rb
***
Bahasa lain yang sering dikemukakan Bung Karno kepada rekan terdekatnya, bahwa ia ingin harta nenek moyang yang telah dirampas oleh imprealisme dan kolonialisme dulu bisa kembali.
Kerajaan-kerajaan di Pulau Sumbawa
